How is cantilever rack different from pallet rack?

Pallet rack has a front beam and stores discrete, boxed loads. Cantilever has an open front, so long material loads from the side and slides in without clearing an obstruction - that's the entire reason the system exists.

How far apart should the columns be?

Close enough that the load doesn't sag between arms. A common starting point puts arm spacing at roughly half the load length, with the remainder overhanging each end evenly. We check that math against your heaviest bundle before finalizing spacing.

Straight arms or inclined arms?

Straight arms suit boxed, banded, or sheet goods. Inclined arms, usually fitted with a lip, keep pipe, tube, and round stock from rolling forward off the arm. Many runs mix both across different levels.

Can arms or levels be added later?

Yes. Arms mount at set increments up the column, so levels can be added or repositioned as your product mix shifts, as long as total load stays within the rated capacity of the column and base.

What does a cantilever rack project in Blue Ash typically cost per pallet position?

It depends on beam capacity, height, and how deep you store, which is why the quote is itemized and the layout shows a position count. Comparing cost per position across two configurations on your own floor plan is the only honest way to answer it.

Will new cantilever rack tie into rack we already have?

Usually. We identify the manufacturer, connector style, and frame profile from photos or measurements first, then design the addition so it matches your current aisle pattern instead of creating a second standard in the building.

Cantilever Rack system inside a Ohio warehouse

Blue Ash, Ohio

Cantilever Pallet Rack Systems in Blue Ash, OH

Name: Cincinnati Pallet Racks - Blue Ash
Address: 2345 Ashland Ave., Cincinnati, OH, 45206, US
Telephone: (513) 957-3017
Price range: $$

A 3PL and manufacturing operation splitting one floor and never having enough of either is the most common reason Blue Ash warehouses call us. Cantilever Rack addresses that directly, reclaiming the positions a typical medical and lab supply layout in this market never uses.

We take the pallet weights, lift truck, and usable height from your Plainfield Road site, weigh it against single-sided runs along the wall, double-sided in open floor, and come back with a drawing, a position count, and a priced bill of material. Call (513) 957-3017.

(513) 957-3017

Why Blue Ash Warehouses Work With Us

Warehouses in and around Kenwood Road business parks tend to be constrained by something specific: a low sprinkler line, tight columns, or a dock that will not take a full truck at once. Those details decide a Blue Ash design, not a standard drawing.

For professional service parts work near Plainfield Road, the deciding factor is normally long material off the floor and back into usable positions. We put that in front of you during the free cantilever rack design consult, with Blue Ash position counts for both directions.

Being close to Blue Ash matters on the small things too: short delivery runs, a quick answer on a cantilever rack revision, and parts on hand when a lift truck clips a frame.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Operations We Rack Around Here

Nearby areas we work in regularly include the Reed Hartman corridor, Kenwood Road business parks, Plainfield Road.

Medical and lab supply

Technology distribution

Professional service parts

Light assembly

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the slab. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Cantilever Rack Project Includes

A cantilever rack quote for Blue Ash starts from measurements, not assumptions — clear height, slab condition, dock access, pallet weights, and which SKUs turn daily versus monthly.

Our design team turns that into a CAD layout with cantilever rack position counts, load capacity per level, and an itemized quote for the Blue Ash site. Because this system trades on long material off the floor and back into usable positions, we usually model an alternative configuration on the same footprint, so you weigh positions against picking speed with real numbers rather than a sales pitch.

Cantilever Rack delivery windows are built around your Kenwood Road business parks dock so trailers do not sit and wait. Installation partners work off the Blue Ash cantilever rack drawing you approved, tag capacities on completion, and phase the job by zone or shift. Parts, added cantilever rack positions, and later reconfigurations go through the same Blue Ash contact.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (513) 957-3017

Recent Installations

Racking projects completed for warehouses across Southwest Ohio and Northern Kentucky.

View More Projects

Get a Cantilever Rack Quote for Your Blue Ash Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (513) 957-3017.

Cincinnati Pallet Racks

2345 Ashland Ave.

Unit #584

Cincinnati, OH 45206

(513) 957-3017

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Cincinnati Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.