How is cantilever rack different from pallet rack?

Pallet rack has a front beam and stores discrete, boxed loads. Cantilever has an open front, so long material loads from the side and slides in without clearing an obstruction - that's the entire reason the system exists.

How far apart should the columns be?

Close enough that the load doesn't sag between arms. A common starting point puts arm spacing at roughly half the load length, with the remainder overhanging each end evenly. We check that math against your heaviest bundle before finalizing spacing.

Straight arms or inclined arms?

Straight arms suit boxed, banded, or sheet goods. Inclined arms, usually fitted with a lip, keep pipe, tube, and round stock from rolling forward off the arm. Many runs mix both across different levels.

Can arms or levels be added later?

Yes. Arms mount at set increments up the column, so levels can be added or repositioned as your product mix shifts, as long as total load stays within the rated capacity of the column and base.

What does a cantilever rack project in Hamilton typically cost per pallet position?

It depends on beam capacity, height, and how deep you store, which is why the quote is itemized and the layout shows a position count. Comparing cost per position across two configurations on your own floor plan is the only honest way to answer it.

Can we add more lanes or positions later without redoing the whole system?

That is the point of designing it as a layout rather than a one-off order. We keep the drawing on file, so adding a bay, a lane, or a run next year starts from where the system already is instead of from scratch.

Cantilever Rack system inside a Ohio warehouse

Hamilton, Ohio

Cantilever Racking Systems in Hamilton, OH

Name: Cincinnati Pallet Racks - Hamilton
Address: 2345 Ashland Ave., Cincinnati, OH, 45206, US
Telephone: (513) 957-3017
Price range: $$

A lot of the calls we get from Hamilton start with a 3PL and manufacturing operation splitting one floor and never having enough of either. Cantilever racking usually fixes it, because it changes how much of a North Hamilton industrial district floor plate is actually available to store product without moving a wall.

With long material off the floor and back into usable positions on the table, the paper converting operations we work with near North Hamilton industrial district usually want cost per pallet position, not a lump sum. That is what the cantilever rack layout and itemized quote for a North Hamilton industrial district building show. Call (513) 957-3017 to start one for Hamilton.

(513) 957-3017

Why Hamilton Warehouses Work With Us

What limits storage in a Grand Boulevard facility is usually structural — a column line in the wrong place, a beam pocket, an older slab. We work those Hamilton constraints out on paper before quoting steel.

We have been laying out cantilever rack for machining and fabrication and paper converting operations in the Hamilton market as part of Warehouse Equipment & Supplies Co. since 1997, and arms repositioned as your product lengths change is the cantilever rack fit question we work through with your Hamilton team before quoting.

One number reaches the people who did the work, whether that is a cantilever rack revision during design or a replacement upright for a Grand Boulevard site three years out.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Operations We Rack Around Here

Nearby areas we work in regularly include the Hamilton Enterprise Park area, North Hamilton industrial district, Grand Boulevard.

Machining and fabrication

Paper converting

Building products

Food distribution

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the slab. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Cantilever Rack Project Includes

We start by understanding the machining and fabrication side of your operation — pallet profile, equipment, clear height, SKU count, throughput — because those inputs decide cantilever rack capacity in a Hamilton Enterprise Park area building long before steel is quoted.

Next comes the cantilever rack layout itself — every position counted, every level rated, and the Hamilton quote itemized by frame, beam, deck, and accessory. Because arms repositioned as your product lengths change changes the math, a second configuration on the same floor plan usually comes with it for comparison.

Cantilever Rack delivery into Hamilton is coordinated around your schedule, and installation partners build to the approved drawing, anchor every frame, and confirm the system performs loaded before turning it over. The job is phased so your Hamilton operation keeps running, and teardown, reconfiguration, or adding a lane later is handled by the same team.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (513) 957-3017

Recent Installations

Racking projects completed for warehouses across Southwest Ohio and Northern Kentucky.

View More Projects

Get a Cantilever Rack Quote for Your Hamilton Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (513) 957-3017.

Cincinnati Pallet Racks

2345 Ashland Ave.

Unit #584

Cincinnati, OH 45206

(513) 957-3017

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Cincinnati Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.