How is cantilever rack different from pallet rack?

Pallet rack has a front beam and stores discrete, boxed loads. Cantilever has an open front, so long material loads from the side and slides in without clearing an obstruction - that's the entire reason the system exists.

How far apart should the columns be?

Close enough that the load doesn't sag between arms. A common starting point puts arm spacing at roughly half the load length, with the remainder overhanging each end evenly. We check that math against your heaviest bundle before finalizing spacing.

Straight arms or inclined arms?

Straight arms suit boxed, banded, or sheet goods. Inclined arms, usually fitted with a lip, keep pipe, tube, and round stock from rolling forward off the arm. Many runs mix both across different levels.

Can arms or levels be added later?

Yes. Arms mount at set increments up the column, so levels can be added or repositioned as your product mix shifts, as long as total load stays within the rated capacity of the column and base.

We are outgrowing our current layout. Can you tear it down and reconfigure it?

Yes — reconfiguring an existing system is common. We measure what is there, note the manufacturer and connection style, and redesign the layout around your current pallet mix before scheduling a teardown and rebuild.

Do you sell used cantilever rack, or only new?

We focus on new components so load ratings and capacity tags are documented from day one. If used steel makes sense for a short-term need we will say so, but for anything carrying real weight day after day, new is usually the better call.

Cantilever Rack system inside a Ohio warehouse

West Chester, Ohio

Cantilever Rack for West Chester, Ohio Warehouses

Name: Cincinnati Pallet Racks - West Chester
Address: 2345 Ashland Ave., Cincinnati, OH, 45206, US
Telephone: (513) 957-3017
Price range: $$

If your West Chester operation is dealing with an older infill building with columns and clear height that do not match a catalog layout, that is a storage design problem, not a leasing problem. Cantilever Rack is built for exactly that situation — it turns the unused clear height in a Union Centre Boulevard corridor building into working load positions instead of aisle.

We size the cantilever racking around your pallets, your lift trucks, and the clear height in your Union Centre Boulevard corridor building, factoring in long material off the floor and back into usable positions. You get a drawing and a line-item price for the Union Centre Boulevard corridor site, not a rough estimate. Call (513) 957-3017 and we will start a West Chester layout.

(513) 957-3017

Why West Chester Warehouses Work With Us

Buildings around the Union Centre Boulevard corridor and Port Union are rarely uniform. Column spacing, dock aprons, and usable height differ enough from one West Chester site to the next that a layout copied from another building wastes positions.

That is part of why cantilever rack fits West Chester operations: arms repositioned as your product lengths change. A short design consult tells you quickly whether that tradeoff works for your SKUs, or whether another system carries more of the load in a Union Centre Boulevard corridor footprint.

Being close to West Chester matters on the small things too: short delivery runs, a quick answer on a cantilever rack revision, and parts on hand when a lift truck clips a frame.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Operations We Rack Around Here

Nearby areas we work in regularly include the Union Centre Boulevard corridor, Port Union, Muhlhauser Road.

3PL and contract warehousing

E-commerce fulfillment

Aerospace suppliers

Consumer goods

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the slab. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Cantilever Rack Project Includes

Every West Chester cantilever rack project begins with the numbers: what you store, how heavy it is, what lifts it, and how tall the usable space is. That West Chester conversation happens over the phone and usually takes about fifteen minutes.

From there our design team produces a CAD cantilever rack layout showing positions, elevations, and aisle widths for your West Chester floor plan, plus an itemized quote so you see cost per pallet position. Where it helps, we price a second configuration on the same plan, with arms repositioned as your product lengths change, so the tradeoff between density and access is a number instead of an opinion. Load ratings for each cantilever rack level are documented in the West Chester drawing, not guessed in the field.

Common cantilever rack items ship from stock, and we stage deliveries to match your Union Centre Boulevard corridor dock. Installation partners set and anchor the system to the West Chester drawing, verify it loaded, and tag capacities. Work is sequenced zone by zone so West Chester receiving and shipping never stop, and we stay reachable for cantilever rack parts, added lanes, and repairs.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (513) 957-3017

Recent Installations

Racking projects completed for warehouses across Southwest Ohio and Northern Kentucky.

View More Projects

Get a Cantilever Rack Quote for Your West Chester Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (513) 957-3017.

Cincinnati Pallet Racks

2345 Ashland Ave.

Unit #584

Cincinnati, OH 45206

(513) 957-3017

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Cincinnati Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.