How is cantilever rack different from pallet rack?

Pallet rack has a front beam and stores discrete, boxed loads. Cantilever has an open front, so long material loads from the side and slides in without clearing an obstruction - that's the entire reason the system exists.

How far apart should the columns be?

Close enough that the load doesn't sag between arms. A common starting point puts arm spacing at roughly half the load length, with the remainder overhanging each end evenly. We check that math against your heaviest bundle before finalizing spacing.

Straight arms or inclined arms?

Straight arms suit boxed, banded, or sheet goods. Inclined arms, usually fitted with a lip, keep pipe, tube, and round stock from rolling forward off the arm. Many runs mix both across different levels.

Can arms or levels be added later?

Yes. Arms mount at set increments up the column, so levels can be added or repositioned as your product mix shifts, as long as total load stays within the rated capacity of the column and base.

Do you handle permits or engineering paperwork for the rack?

We provide the layout drawing, load ratings, and capacity tags for each level, and can supply manufacturer documentation your insurer or local authority may ask for. Anything requiring a stamped submittal we coordinate through the manufacturer.

Our dock is tight and we cannot receive a full truckload at once. Does that change anything?

It changes the delivery plan, not the design. We stage material in smaller drops timed to your receiving hours, and sequence installation zone by zone so a tight dock does not hold up the schedule.

Cantilever Rack system inside a Ohio warehouse

Fairfield, Ohio

Cantilever Rack in Fairfield, OH

Name: Cincinnati Pallet Racks - Fairfield
Address: 2345 Ashland Ave., Cincinnati, OH, 45206, US
Telephone: (513) 957-3017
Price range: $$

Most metal fabrication and food processing operations in Fairfield outgrow the layout before they outgrow the building, usually starting with a 3PL and manufacturing operation splitting one floor and never having enough of either. Cantilever Rack is the system we reach for when the floor is full but the air above Symmes Road racks is not.

We size the cantilever rack around your pallets, your lift trucks, and the clear height in your Route 4 industrial corridor building, factoring in arm length and capacity set by the bundles you handle. You get a drawing and a line-item price for the Route 4 industrial corridor site, not a rough estimate. Call (513) 957-3017 and we will start a Fairfield layout.

(513) 957-3017

Why Fairfield Warehouses Work With Us

Fairfield operators mixing metal fabrication with food processing usually need one part of the floor dense and another part fully selective. That split is exactly where cantilever rack tends to earn its keep near Seward Road.

That is part of why cantilever rack fits Fairfield operations: single-sided runs along the wall, double-sided in open floor. A short design consult tells you quickly whether that tradeoff works for your SKUs, or whether another system carries more of the load in a Route 4 industrial corridor footprint.

You also get one point of contact for the whole Fairfield cantilever rack project. The same person who draws the layout quotes the steel, schedules delivery around your Route 4 industrial corridor dock, and handles replacement parts two years from now.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Operations We Rack Around Here

Nearby areas we work in regularly include the Route 4 industrial corridor, Symmes Road, Seward Road.

Metal fabrication

Food processing

Automotive suppliers

Paper and packaging

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the slab. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Cantilever Rack Project Includes

A cantilever rack quote for Fairfield starts from measurements, not assumptions — clear height, slab condition, dock access, pallet weights, and which SKUs turn daily versus monthly.

Our design team turns that into a CAD layout with cantilever rack position counts, load capacity per level, and an itemized quote for the Fairfield site. Because this system trades on single-sided runs along the wall, double-sided in open floor, we usually model an alternative configuration on the same footprint, so you weigh positions against picking speed with real numbers rather than a sales pitch.

Common cantilever rack items ship from stock, and we stage deliveries to match your Route 4 industrial corridor dock. Installation partners set and anchor the system to the Fairfield drawing, verify it loaded, and tag capacities. Work is sequenced zone by zone so Fairfield receiving and shipping never stop, and we stay reachable for cantilever rack parts, added lanes, and repairs.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (513) 957-3017

Recent Installations

Racking projects completed for warehouses across Southwest Ohio and Northern Kentucky.

View More Projects

Get a Cantilever Rack Quote for Your Fairfield Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (513) 957-3017.

Cincinnati Pallet Racks

2345 Ashland Ave.

Unit #584

Cincinnati, OH 45206

(513) 957-3017

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Cincinnati Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.