How is cantilever rack different from pallet rack?

Pallet rack has a front beam and stores discrete, boxed loads. Cantilever has an open front, so long material loads from the side and slides in without clearing an obstruction - that's the entire reason the system exists.

How far apart should the columns be?

Close enough that the load doesn't sag between arms. A common starting point puts arm spacing at roughly half the load length, with the remainder overhanging each end evenly. We check that math against your heaviest bundle before finalizing spacing.

Straight arms or inclined arms?

Straight arms suit boxed, banded, or sheet goods. Inclined arms, usually fitted with a lip, keep pipe, tube, and round stock from rolling forward off the arm. Many runs mix both across different levels.

Can arms or levels be added later?

Yes. Arms mount at set increments up the column, so levels can be added or repositioned as your product mix shifts, as long as total load stays within the rated capacity of the column and base.

We are outgrowing our current layout. Can you tear it down and reconfigure it?

Yes — reconfiguring an existing system is common. We measure what is there, note the manufacturer and connection style, and redesign the layout around your current pallet mix before scheduling a teardown and rebuild.

Do you handle permits or engineering paperwork for the rack?

We provide the layout drawing, load ratings, and capacity tags for each level, and can supply manufacturer documentation your insurer or local authority may ask for. Anything requiring a stamped submittal we coordinate through the manufacturer.

Cantilever Rack system inside a Ohio warehouse

Cincinnati, Ohio

Cantilever Rack for Cincinnati, Ohio Warehouses

Name: Cincinnati Pallet Racks - Cincinnati
Address: 2345 Ashland Ave., Cincinnati, OH, 45206, US
Telephone: (513) 957-3017
Price range: $$

Most food & beverage distribution and 3pl and warehousing operations in Cincinnati outgrow the layout before they outgrow the building, usually starting with lumber or pipe stacked on the floor and blocking work areas. Cantilever Rack is the system we reach for when the floor is full but the air above Lower Price Hill racks is not.

We size the cantilever racking around your pallets, your lift trucks, and the clear height in your Queensgate building, factoring in long material off the floor and back into usable positions. You get a drawing and a line-item price for the Queensgate site, not a rough estimate. Call (513) 957-3017 and we will start a Cincinnati layout.

(513) 957-3017

Why Cincinnati Warehouses Work With Us

Cincinnati operators mixing food & beverage distribution with 3pl and warehousing usually need one part of the floor dense and another part fully selective. That split is exactly where cantilever rack tends to earn its keep near Camp Washington.

That is part of why cantilever rack fits Cincinnati operations: arms repositioned as your product lengths change. A short design consult tells you quickly whether that tradeoff works for your SKUs, or whether another system carries more of the load in a Queensgate footprint.

We also keep the Cincinnati cantilever rack layout on file, so adding a bay next year or replacing a bent frame does not start from scratch.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Operations We Rack Around Here

Nearby areas we work in regularly include Queensgate, Lower Price Hill, Camp Washington, Bond Hill.

Food & beverage distribution

3PL and warehousing

Consumer products

Machine shops

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the slab. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Cantilever Rack Project Includes

The first step is a working list of what has to fit in your Cincinnati space: pallet sizes, heaviest load, forklift reach, and how many SKUs need direct access versus cantilever rack depth.

From there our design team produces a CAD cantilever rack layout showing positions, elevations, and aisle widths for your Cincinnati floor plan, plus an itemized quote so you see cost per pallet position. Where it helps, we price a second configuration on the same plan, with arms repositioned as your product lengths change, so the tradeoff between density and access is a number instead of an opinion. Load ratings for each cantilever rack level are documented in the Cincinnati drawing, not guessed in the field.

Common cantilever rack items ship from stock, and we stage deliveries to match your Queensgate dock. Installation partners set and anchor the system to the Cincinnati drawing, verify it loaded, and tag capacities. Work is sequenced zone by zone so Cincinnati receiving and shipping never stop, and we stay reachable for cantilever rack parts, added lanes, and repairs.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (513) 957-3017

Recent Installations

Racking projects completed for warehouses across Southwest Ohio and Northern Kentucky.

View More Projects

Get a Cantilever Rack Quote for Your Cincinnati Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (513) 957-3017.

Cincinnati Pallet Racks

2345 Ashland Ave.

Unit #584

Cincinnati, OH 45206

(513) 957-3017

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Cincinnati Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.