How is cantilever rack different from pallet rack?

Pallet rack has a front beam and stores discrete, boxed loads. Cantilever has an open front, so long material loads from the side and slides in without clearing an obstruction - that's the entire reason the system exists.

How far apart should the columns be?

Close enough that the load doesn't sag between arms. A common starting point puts arm spacing at roughly half the load length, with the remainder overhanging each end evenly. We check that math against your heaviest bundle before finalizing spacing.

Straight arms or inclined arms?

Straight arms suit boxed, banded, or sheet goods. Inclined arms, usually fitted with a lip, keep pipe, tube, and round stock from rolling forward off the arm. Many runs mix both across different levels.

Can arms or levels be added later?

Yes. Arms mount at set increments up the column, so levels can be added or repositioned as your product mix shifts, as long as total load stays within the rated capacity of the column and base.

Can we add more lanes or positions later without redoing the whole system?

That is the point of designing it as a layout rather than a one-off order. We keep the drawing on file, so adding a bay, a lane, or a run next year starts from where the system already is instead of from scratch.

Our dock is tight and we cannot receive a full truckload at once. Does that change anything?

It changes the delivery plan, not the design. We stage material in smaller drops timed to your receiving hours, and sequence installation zone by zone so a tight dock does not hold up the schedule.

Cantilever Rack system inside a Ohio warehouse

Middletown, Ohio

Cantilever Rack in Middletown, OH

Name: Cincinnati Pallet Racks - Middletown
Address: 2345 Ashland Ave., Cincinnati, OH, 45206, US
Telephone: (513) 957-3017
Price range: $$

A lot of the calls we get from Middletown start with a 3PL and manufacturing operation splitting one floor and never having enough of either. Cantilever pallet rack usually fixes it, because it changes how much of a Yankee Road floor plate is actually available to store product without moving a wall.

With single-sided runs along the wall, double-sided in open floor on the table, the plastics operations we work with near Yankee Road usually want cost per pallet position, not a lump sum. That is what the cantilever rack layout and itemized quote for a Yankee Road building show. Call (513) 957-3017 to start one for Middletown.

(513) 957-3017

Why Middletown Warehouses Work With Us

The industrial stock near the Middletown industrial park area ranges from older infill space to newer construction, and each one limits a racking plan differently. Height, columns, and floor condition all move the answer in Middletown.

Since 1997 we have supplied steel and metals, plastics, and 3PL operations across Middletown and the surrounding area through Warehouse Equipment & Supplies Co. The consult up front, where we talk through long material off the floor and back into usable positions, is why the first layout is usually close to the final one.

And you deal with one team throughout — cantilever rack layout, pricing, delivery windows into the Middletown industrial park area, installation scheduling, and parts after the fact. Nothing about the Middletown job gets handed to a call center.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Operations We Rack Around Here

Nearby areas we work in regularly include the Middletown industrial park area, Yankee Road, Oxford State Road.

Steel and metals

Plastics

Regional distribution

Building supply

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the slab. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Cantilever Rack Project Includes

A Middletown cantilever rack project starts with a phone call. We go through pallet footprint and weight, forklift type and lift height, clear height under the sprinklers in your Middletown industrial park area building, column spacing, and how fast product turns.

You then get a cantilever rack position count for the Middletown footprint, load ratings for every beam level, and pricing broken out by component, so cost per pallet position is visible rather than buried in a lump sum. Where it makes sense we run the same plan a second way, with long material off the floor and back into usable positions.

Stock cantilever rack components move within days, and we time drops to your Middletown shift schedule instead of one large delivery. Installation partners anchor and align to the drawing, tag every bay with its capacity, and work around your plastics production hours. The Middletown layout stays on file for the next expansion.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (513) 957-3017

Recent Installations

Racking projects completed for warehouses across Southwest Ohio and Northern Kentucky.

View More Projects

Get a Cantilever Rack Quote for Your Middletown Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (513) 957-3017.

Cincinnati Pallet Racks

2345 Ashland Ave.

Unit #584

Cincinnati, OH 45206

(513) 957-3017

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Cincinnati Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.