How is cantilever rack different from pallet rack?

Pallet rack has a front beam and stores discrete, boxed loads. Cantilever has an open front, so long material loads from the side and slides in without clearing an obstruction - that's the entire reason the system exists.

How far apart should the columns be?

Close enough that the load doesn't sag between arms. A common starting point puts arm spacing at roughly half the load length, with the remainder overhanging each end evenly. We check that math against your heaviest bundle before finalizing spacing.

Straight arms or inclined arms?

Straight arms suit boxed, banded, or sheet goods. Inclined arms, usually fitted with a lip, keep pipe, tube, and round stock from rolling forward off the arm. Many runs mix both across different levels.

Can arms or levels be added later?

Yes. Arms mount at set increments up the column, so levels can be added or repositioned as your product mix shifts, as long as total load stays within the rated capacity of the column and base.

Will new cantilever rack tie into rack we already have?

Usually. We identify the manufacturer, connector style, and frame profile from photos or measurements first, then design the addition so it matches your current aisle pattern instead of creating a second standard in the building.

What does a cantilever rack project in Springdale typically cost per pallet position?

It depends on beam capacity, height, and how deep you store, which is why the quote is itemized and the layout shows a position count. Comparing cost per position across two configurations on your own floor plan is the only honest way to answer it.

Cantilever Rack system inside a Ohio warehouse

Springdale, Ohio

Cantilever Pallet Rack Systems in Springdale, OH

Name: Cincinnati Pallet Racks - Springdale
Address: 2345 Ashland Ave., Cincinnati, OH, 45206, US
Telephone: (513) 957-3017
Price range: $$

Long material taking up floor space because standard racks will not hold it shows up constantly in Princeton Pike facilities. Adding cantilever pallet rack is how a Springdale operation gets capacity back without paying for square footage it already has.

Because this system is about single-sided runs along the wall, double-sided in open floor, we start with the storage math for your Springdale footprint — how many positions it can carry and what that does to travel time — then send a CAD layout and an itemized quote before anything is ordered. Call (513) 957-3017 and tell us what you are storing in Springdale.

(513) 957-3017

Why Springdale Warehouses Work With Us

What limits storage in a Princeton Pike facility is usually structural — a column line in the wrong place, a beam pocket, an older slab. We work those Springdale constraints out on paper before quoting steel.

Cantilever Rack suits Springdale buildings for one reason — long material off the floor and back into usable positions — which matters more here than in a newer big-box facility built around one uniform layout. We walk through that fit during a free design consult before you commit to steel for Springdale.

Service does not stop at handoff on a Springdale job either. If a cantilever rack level needs to move in your Crescentville industrial area building or a beam gets damaged, the same team that designed the system answers the phone.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Operations We Rack Around Here

Nearby areas we work in regularly include Kemper Road, the Crescentville industrial area, Princeton Pike.

Manufacturing support

Retail distribution

Industrial supply

Print and mailing

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the slab. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Cantilever Rack Project Includes

We start by understanding the manufacturing support side of your operation — pallet profile, equipment, clear height, SKU count, throughput — because those inputs decide cantilever rack capacity in a Kemper Road building long before steel is quoted.

Next comes the cantilever rack layout itself — every position counted, every level rated, and the Springdale quote itemized by frame, beam, deck, and accessory. Because long material off the floor and back into usable positions changes the math, a second configuration on the same floor plan usually comes with it for comparison.

Cantilever Rack delivery into Springdale is coordinated around your schedule, and installation partners build to the approved drawing, anchor every frame, and confirm the system performs loaded before turning it over. The job is phased so your Springdale operation keeps running, and teardown, reconfiguration, or adding a lane later is handled by the same team.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (513) 957-3017

Recent Installations

Racking projects completed for warehouses across Southwest Ohio and Northern Kentucky.

View More Projects

Get a Cantilever Rack Quote for Your Springdale Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (513) 957-3017.

Cincinnati Pallet Racks

2345 Ashland Ave.

Unit #584

Cincinnati, OH 45206

(513) 957-3017

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Cincinnati Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.