How is cantilever rack different from pallet rack?

Pallet rack has a front beam and stores discrete, boxed loads. Cantilever has an open front, so long material loads from the side and slides in without clearing an obstruction - that's the entire reason the system exists.

How far apart should the columns be?

Close enough that the load doesn't sag between arms. A common starting point puts arm spacing at roughly half the load length, with the remainder overhanging each end evenly. We check that math against your heaviest bundle before finalizing spacing.

Straight arms or inclined arms?

Straight arms suit boxed, banded, or sheet goods. Inclined arms, usually fitted with a lip, keep pipe, tube, and round stock from rolling forward off the arm. Many runs mix both across different levels.

Can arms or levels be added later?

Yes. Arms mount at set increments up the column, so levels can be added or repositioned as your product mix shifts, as long as total load stays within the rated capacity of the column and base.

What does a cantilever rack project in Norwood typically cost per pallet position?

It depends on beam capacity, height, and how deep you store, which is why the quote is itemized and the layout shows a position count. Comparing cost per position across two configurations on your own floor plan is the only honest way to answer it.

How quickly can you get cantilever rack into a Norwood warehouse?

Standard components generally ship within a few days of an approved order, and complete projects — layout, steel, and installation — typically run one to four weeks depending on size. If you have a hard date, say so early and we will build the schedule backward from it.

Cantilever Rack system inside a Ohio warehouse

Norwood, Ohio

Cantilever Rack for Norwood, Ohio Warehouses

Name: Cincinnati Pallet Racks - Norwood
Address: 2345 Ashland Ave., Cincinnati, OH, 45206, US
Telephone: (513) 957-3017
Price range: $$

Most printing and converting and small-batch manufacturing operations in Norwood outgrow the layout before they outgrow the building, usually starting with a 3PL and manufacturing operation splitting one floor and never having enough of either. Cantilever Rack is the system we reach for when the floor is full but the air above the Norwood Lateral corridor racks is not.

We take the pallet weights, lift truck, and usable height from your Forest Avenue site, weigh it against arm length and capacity set by the bundles you handle, and come back with a drawing, a position count, and a priced bill of material. Call (513) 957-3017.

(513) 957-3017

Why Norwood Warehouses Work With Us

Buildings around Smith Road and the Norwood Lateral corridor are rarely uniform. Column spacing, dock aprons, and usable height differ enough from one Norwood site to the next that a layout copied from another building wastes positions.

That is part of why cantilever rack fits Norwood operations: single-sided runs along the wall, double-sided in open floor. A short design consult tells you quickly whether that tradeoff works for your SKUs, or whether another system carries more of the load in a Smith Road footprint.

Being close to Norwood matters on the small things too: short delivery runs, a quick answer on a cantilever rack revision, and parts on hand when a lift truck clips a frame.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Operations We Rack Around Here

Nearby areas we work in regularly include Smith Road, the Norwood Lateral corridor, Forest Avenue.

Printing and converting

Small-batch manufacturing

Service parts distribution

Specialty foods

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the slab. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Cantilever Rack Project Includes

A cantilever rack quote for Norwood starts from measurements, not assumptions — clear height, slab condition, dock access, pallet weights, and which SKUs turn daily versus monthly.

From there our design team produces a CAD cantilever rack layout showing positions, elevations, and aisle widths for your Norwood floor plan, plus an itemized quote so you see cost per pallet position. Where it helps, we price a second configuration on the same plan, with single-sided runs along the wall, double-sided in open floor, so the tradeoff between density and access is a number instead of an opinion. Load ratings for each cantilever rack level are documented in the Norwood drawing, not guessed in the field.

Common cantilever rack items ship from stock, and we stage deliveries to match your Smith Road dock. Installation partners set and anchor the system to the Norwood drawing, verify it loaded, and tag capacities. Work is sequenced zone by zone so Norwood receiving and shipping never stop, and we stay reachable for cantilever rack parts, added lanes, and repairs.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (513) 957-3017

Recent Installations

Racking projects completed for warehouses across Southwest Ohio and Northern Kentucky.

View More Projects

Get a Cantilever Rack Quote for Your Norwood Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (513) 957-3017.

Cincinnati Pallet Racks

2345 Ashland Ave.

Unit #584

Cincinnati, OH 45206

(513) 957-3017

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Cincinnati Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.